Bytemart

Installation Notes

WalkGuard Surveillance Software Download

You can download the WalkGuard software from the link below:

http://www.bytemart.co.uk/downloads/walkguard.zip

This isn’t necessary to install in order for the camera to function, but it contains extra surveillance features that you might find useful!

Camera Power-up

Please bear in mind that the lights on the camera don’t light up for about a minute after powering up - during this time the camera is performing it’s internal diagnostics. It isn’t broken!

Supplied RJ-45/Network Cable

The cable supplied with this camera is for direct connection to the PC only - it won’t work if plugged from the router into the camera, as it is a crossover cable. Once the camera is configured for wireless operation, you don’t need to use the cable.

Support

If you have any problems with the installation or use of your camera, please visit our blog at:

http://www.bytemart.co.uk/blog

If you can’t find the information you need there, please email your support question to:

support@bytemart.co.uk

And we will respond as soon as possible.

Many thanks for your purchase!

Bytemart